XM-19 Stainless Steel Plates, Sheets & XM-19 Round Bars
XM-19 Stainless Steel Rods Manufacturers, XM-19 Stainless Steel Sheet Exporters, XM-19 Stainless Steel Round Bars, XM-19 Stainless Steel Bars Suppliers in India.
Hindustan Steel Engineering Company is one of the renowned exporter and trader of manufacturer of XM-19 Round Bars , which has outstanding resistance to hydrochloric acid at all concentrations and temperatures. Phosphorus has a strongly embrittling effect in these alloys and decreases weldability (hot shortness and crack formation). Therefore phosphorus content is kept as low as possible.
These additions make XM-19 Flat Bars age-hardenable. Chromium increases strength and has a surprisingly favourable effect on resistance to erosion corrosion in fast-flowing seawater and to erosion by solids. Aluminium increases strength, seawater and scaling resistance. Beryllium has the strongest effect on mechanical properties after age-hardening.
The solubility of carbon in nickel is severely reduced as copper content increases – it is about 0.01 % with a copper content of 90 %. Carbon is not detrimental in these alloys. Cobalt can often occur as an uncontrolled constituent in these XM-19 Hex Bars offered by Hindustan Steel Engineering Company depending on the cobalt content of the nickel used.
Antimony, arsenic, sulphur, tellurium and bismuth are embrittling in small quantities, alone or in combinations, and should not be present in practice in these alloys. Further addition elements in XM-19 Sheets of Hindustan Steel Engineering Company are indicated in the identification symbol by attaching the chemical symbol and very often by stating the mean contents. XM-19 Plates offered by Hindustan Steel Engineering Company can be most effective under high temperatures and corrosive environments, with high stress resistance.
UNS S20910 XM-19 Stainless Steel Plates Distributor, Stainless Steel S20910 Round Rods, Stainless Steel Hex Bars, XM 19 Stainless Steel Strip Dealers in India.
XM 19 Stainless Steel Alloy Specification
Grade | UNS S20910 |
standard | ABTN / ASTM / SAE / DIN / AISI XM-19 / ASTM A276, ASTM A580, ASTM F1314 |
WNR | 1.3964 |
Chemical Composition for XM-19 Stainless Steel
C % |
Mn % |
Cr % |
Ni % |
Mo % |
W % |
Si % |
OTHERS % |
max. 0.06 |
4.00 - 6.00 |
20.50 - 23.50 |
11.50 - 13.50 |
1.50 - 3.00 |
- |
max. 1.00 |
P=max. 0.045 |